User Manual

PowerBox-Systems − World Leaders in RC Power Supply Systems

This is the procedure: use the arrow buttons to select the point you wish to adjust. Brieﬂy press the displayed setting at Value,

then adjust the servo for this position. The Smooth button can be used to even out the course of the curve. Right at the bottom

you will ﬁnd a Reset button which sets the curve back to a straight line. Once you have set the desired curve, return to the Ser-

vo Curve menu, where you will ﬁnd three Preview buttons:

- Servo curve

This displays the shape of the pure servo curve.

- Function curve

This displays the shape of the pure function curve. If you have

already set up Expo or Dual Rates, this will be shown in this

view.

- Result

This displays the net result of the function curve and the servo

curve.

If you wish, you can reset the servo curve once you

return to the Servo Overview. If you accidentally ﬁnd

yourself at the Reset button, that is not a problem: sim-

ply select the Curve Editor again, and the curve will still

be present there with the settings you last selected.

NOTE