User Manual

50
PowerBox-Systems − World Leaders in RC Power Supply Systems
The recorded minimum and maximum values and alarms can
be erased individually in each widget. If you wish to be able to
erase all the alarms and all the minimum and maximum values
at once, you can press the Right-hand button in the Pull-
down menu. This action resets all values and alarms.
5. Update
5.1 ATOM
The ATOM transmitter can be updated using either a USB memory stick (1GB – 32GB) or WiFi.
5.1.1. USB Update
If you wish to update the transmitter, the first step is to download the PowerBox Terminal program from our website, and install
the program on your PC or laptop. Start the program and select ATOM Update at top left.
Insert a USB stick in your PC, and follow the on-screen instructions. The USB stick will now be formatted, and all the essential data
copied onto it. Once that is finished, switch your ATOM transmitter on and wait until it has booted up. Now insert the USB stick in the
ATOM transmitter, move to the Settings > System > Software.