User Manual

PowerBox Sensor
- 2 -
Dear customer, we are delighted that you have decided to purchase the POWER
BOX Sensor switch backer from our range. This is a modern, high-performance
switch system with integral battery backer for your valuable model aircraft, contain-
ing two entirely independent electronic switches in addition to the dual battery cou-
pling facility. We have also managed to combine these features with a linear stabi-
lised power supply voltage for receiver and servos. The linear stabilised voltage is
generated by two independent IC-controlled voltage regulators of extremely low-
loss design.
The switch backer is very simple and safe in operation (the same SensorSwitch
system is used in our PowerBox “Competition” and “Champion”), but it is important
that you understand its features if you are to make best use of it. Please read
through these instructions so that you understand your new accessory fully.
We wish you much pleasure and success with your POWER BOX Sensor.
Inhaltsverzeichnis
1. Product description................................................................. Page 2
2. Specification........................................................................... Page 4
3. Connections and controls ....................................................... Page 4
4. Operating and Safety Notes..................................................... Page 5
5. Using the Sensor-Switch......................................................... Page 6
6. Guarantee conditions.............................................................. Page 7
1. Product description
The POWER BOX Sensor is the w orl d ’ s fi rst sw i tch sy ste m for small to medium-
sized models which combines the functions of a battery backer, dual de-coupled
batteries, plus two independent electronic switches and two IC-controlled linear
voltage regulators, each independent of the other. Naturally, each battery can be
switched on and off separately. Our system also includes a SET button which pro-
vides an absolutely secure power-on / power-off method and protection against the
effects of vibration.
The PowerBox Sensor provides a linearly stabilised voltage of exactly 5.9 Volts
for powering your receiver and servos. This fulfils exactly the requirements of all RC
manufacturers who state a maximum permissible voltage of 6.0 Volts for their RC
components.