User's Manual

User Manual
WCG91501 – 915 MHz Wireless Charging Grip
Rev 1 – 2019/11 User’s Manual – WCG91501 Grip Page 4
www.powercastco.com
Notes:
1. If the WCG91501 LED does not respond when placed in front of the transmitter, verify
that the switch on the back of the device is turned on. If the LED still does not respond
turn the switch off for 5 seconds and then turn it back on. If the LED still does not
respond the battery could be fully depleted. Place the WCG91501 in front of the
PowerSpot TX91503 RF Wireless Power Transmitter and enable the transmitter
manually by pressing the button on top. See the PowerSpot TX91503 instruction manual
for more information.
2. When the WCG91501 will not be used for a long period of time, turn the rear switch off
to avoid discharging or potentially damaging the internal battery.
3. If a firmware upgrade is available for your WCG91501, turn the switch off on the back
and insert a USB-C cable. Turn the switch on and within 2 minutes, utilize the
recommended mobile phone application to connect to the WCG91501 and upload the
firmware upgrade. Once the upgrade is complete, remove the USB-C cable and turn the
switch off and then back on.
4. The WCG91501 will only charge the inserted Joy-Con controllers if the WCG91501
internal battery has adequate charge. The Joy-Con controllers will automatically begin
charging from the WCG91501 once the internal battery has been recharged to the
required level. Note if the internal battery is extremely discharged causing the LED to
not indicate charge status, the PowerSpot TX91503 RF Wireless Power Transmitter can
be manually enabled for charging by pressing the button.
SPECIFICATIONS
Item
Description
Communication
Bluetooth Low Energy
(BLE)
Approvals
United States
-
FCC ID: YESWCG
91
501
Canada – IC ID: 8985A-WCG91501
Operating Temperature
0
°C to
40
°C
Environment
Indoor use only
Color
Black
Dimensions
6.2
”
×
4.6
”
×
1.8
”
(
157.5
x
116.8
x
45.7
mm)
SUPPORT
Technical support for Powercast products can be initiated through the following methods:
Website contact form: http://www.powercastco.com/contact/
Telephone: [phone]