Installation Manual
Power Monitoring and Management 297
–
Power Off System
turns OFF the server’s power. This option is
disabled if the system is already powered OFF.
–
NMI (Non-Masking Interrupt)
generates an NMI to halt system
operation.
–
Graceful Shutdown
shuts down the system.
NOTE: Ensure that the shutdown option is configured for the operating
system before you perform a graceful shutdown using this option. If you use
this option without configuring it on the operating system, it reboots the
managed system instead of performing a shutdown operation.
–
Reset System (warm boot)
resets the system without powering off.
This option is disabled if the system is already powered off.
–
Power Cycle System (cold boot)
powers off and then reboots the
system. This option is disabled if the system is already powered OFF.
4
Click
Apply
. A dialog box is displayed requesting confirmation.
5
Click
OK
to perform the power management action you selected (for
example, cause the system to reset).
Using RACADM
Open a Telnet/SSH text console to the server, log in, and type:
racadm serveraction <action>
where <action> is powerup, powerdown, powercycle, hardreset, or
powerstatus.