Operation Manual

Intended use
The wheel wrench KH4055 is intended for loosening and
tightening of wheel nuts / bolts during a tyre change.
Technical data
Length: 350 mm - 530 mm
Wrench widths: 17 mm and 19 mm
Using the wheel wrench
• Park the vehicle on a level surface, put it in a low gear and
set the hand break.
• Also secure the vehicle against rolling with appropriate
equipment.
 Important:
Follow the safety / operating instructions in the operating
manual for your vehicle.
• Loosen the wheel nuts / bolts of the wheel to be changed
in an alternating cross pattern before lifting the vehicle with
the jack.
8
IB_KH4055_BK53459_LB5 21.06.2010 10:25 Uhr Seite 8