Operating Instructions
CelloTrack LTE Plus Overview
CelloTrack XT LTE Overview.docx Page 17 of 40
Copyright © 2020 by Pointer Telocation, Ltd.
The connector pin out is as follows:
Pin 1 – VCC
Pin 2 – Ground (GND)
Pin 3 – General Purpose I/O 1 (GP1)
Pin 4 – General Purpose I/O 2 (GP2)
Pin 5 – RS232 TXD
Pin 6 – RS232 RXD
------------------------------------------------------------------------------------------------
NOTE: Removing the connector cover revokes the unit’s IP67 compliancy. It is the
customer’s responsibility to provide proper sealing if the connector cover is removed.
------------------------------------------------------------------------------------------------
4.1.5 CelloTrack Power Harness
The CelloTrack Power utilizes a 45 cm pigtail harness which ends with several free
wires and a connector for the programming cable, as described in the following table.
Pin
No.
Color
Function
Free Wire
Programming
Connector Pin No.
1.
red
VCC (9-32v)
+
2.
black
Ground (GND)
+
1
3.
orange
General Purpose I/O (GP)
+
4.
brown
General Purpose I/O (GP)
+
5.
green
RS232 TXD
2
6.
yellow
RS232 RXD
3
Pin 1
Pin 6