Operating Instructions

CelloTrack Solar Overview

CelloTrack Solar Overview.docx Page 13 of 31

GNSS is in GYRO mode

(only for compatible

models)

Note: To save energy, the COMM LED performs only 10 indications cycles (total time

120 seconds) upon unit activation and/or upon unit reset, and is then shut off.

3.2 User Features

3.2.1 Activation

When the unit is not active, upon pressing the front button for 5 seconds (long press),

the unit is activated. The SYS LED lights for 5 seconds in

Green, to indicate that the

unit is active. The COMM LED performs 10 GSM/GPS indication cycles, and then is shut

off.

Note that after battery replacement, the unit is automatically activated, i.e. with no

need of activation by button as described above. After automatic activation, the SYS

LED behaves as described above.

------------------------------------------------------------------------------------------------

NOTE: Consecutive presses are ignored, if started before the SYS LED indication of

the previous press/sequence ended.

------------------------------------------------------------------------------------------------

3.2.2 De-Activation

When the unit is active, upon pressing the front button for 5 seconds (long press), the

unit is de-activated. The SYS LED shall light for 5 seconds in

Red, to indicate that the

unit is not active. For enabled logged or distress events, the de-activation is postponed

until the events are transmitted (or until Modem Max On Time expiration). In the

postponed time, the SYS LED blinks (200msec on every 1 second) in Red.

------------------------------------------------------------------------------------------------

NOTE: Consecutive presses are ignored, if started before the SYS LED indication of

the previous press/sequence ended.

------------------------------------------------------------------------------------------------

3.2.3 Panic/Distress

When the unit is active, upon pressing the front button for a period of between 0 and 5

seconds (short press), a panic/distress press is recognized. The SYS LED then reflects

the battery SOH (State of Health):

If the SOH is above the preprogrammed minimum - the SYS LED lights for 2

seconds in Green.

If the SOH is below (or equal to) the preprogrammed minimum - the SYS LED

lights for 2 seconds in

Red.