Operating Instructions

CelloTrack Solar / LV500

Overview

CelloTrack Solar - LV500 Overview.docx Page 16 of 32

3.4 MultiSense and MultiSense-TH

The MultiSense is a remote peripheral sensor, communicating and configured by the

CelloTrack unit via a short-range RF link.

There are 2 models of MultiSense: regular devices that can measure temperature

called "MultiSense", and "MultiSense-TH" devices which have a combined temperature

and humidity sensor.

The MultiSense device has the following sensors:

Temperature sensor

Humidity sensor (only in the MultiSense-TH model)

Hall effect magnetic sensor

Ambient Light Sensor (ALS)

Accelerometer sensor

The CelloTrack unit supports up to 16 fully programmable MultiSense devices.

If "Guest mode" is enabled (via the Guest and Tag MultiSense reporting parameter),

the unit will also connect with MultiSense units not in its list, read their sensors and

pass the data (in raw format) to the server. Only listed MultiSense units also get

configuration blocks and their readings are fully processed by the CelloTrack unit.

If "Tag mode" is enabled, the CelloTrack unit will only report on existence (reception of

advertisements) of unpaired MultiSense units, not reading their sensors.

MultiSense devices can be paired with the unit by entering the MultiSense MAC

address, which is written on the MultiSense, in the MultiSense Editor window accessed

via the Cellocator Programmer.

3.5 CelloTrack Feature List

The following list details the features and capabilities of the CelloTrack family. These

features are actually a combination of the Fleet management capabilities derived from

Cellocator’s Cello product line and specific asset management capabilities designed

solely for the CelloTrack family.

Geo-Fences (100)

Way Points

Roaming List (100)