Operating Instructions

CelloTrack Solar / LV500

Overview

CelloTrack Solar - LV500 Overview.docx Page 21 of 32

If both Not Live Tracking and Motion Detection are enabled, and the unit is in the

Hibernation state, then when motion is detected the unit immediately opens a distress

session, sends a “start motion” message, and returns to Hibernation. When no further

motion is detected, the unit opens a distress session, sends a “stop motion” message,

and returns to Hibernation. This is known as start-stop reporting during Hibernation.

4.3 Tracking State

By default, the unit is configured to enter the Tracking state when motion is detected

and to exit Tracking when motion ends. This is done to conserve battery power.

In the Tracking state the unit does the following:

Powers up its GNSS module.

Powers up its GSM module.

Sends regular location updates to the server.

Provides full CelloTrack functionality, including: periodical and distance events,

geo-fence related events, speed related events, and maintenance events.

Activates its interfaces.

In the Tracking state, the unit provides the best tracking and communication features,

generates time/location updates (known as time events), and behaves as a standard

fleet management oriented unit. This is the most energy-intensive state.

Motion detected

Motion not

detected

Hibernation

Tracking