Product Manual

REPLACEMENT & INSTALLATION OF THE BATTERY

The replacement steps of the battery are as follows:

1) Remove the six screws and open the upper cover.

Screws

2) Remove the xed bar securing the battery.

Fixed bar

3) Remove the connection of the POSITIVE (RED) cable from the battery, wrap

the lug of the cable with electrical tape.

10 0 Ah B ATT ERY

Battery

Positive (Red)

Battery

Negative

(Black)

4) Remove the connection of the NEGATIVE (BLACK) cable from the battery,

wrap the lug of the cable with electrical tape.

5) Remove the battery.

6) Put into the new battery and make it be in right position. If the new battery is

smaller than the previous one, place the new battery in the center position. This

will help to stabilize the unit’s center of gravity, making it easier to pull.

7) Conrm the batteries positive and negative terminals are aligned with the

6-4/5 in .

13 in .

8-2/5 in.