Product Manual

Page 22 of 35
Severe thermal burns can occur on contact.
Combustible debris, such as leaves, grass, brush, etc. can catch fire.
1. Allow muffler, engine cylinder, and fins to cool before touching.
2. Remove accumulated debris from muffler area and cylinder area.
3. Replacement parts must be the same and installed in the same position as the original parts or
fire could result.
Sediment Cup
Cleaning
⚠WARNING
Gasoline is highly flammable and explosive, and you can be burned or seriously injured when
handling fuel
• Stop engine and keep heat, sparks, and flame away.
• Handle fuel only outdoors.
• Wipe up spills immediately.
1. Move the fuel shut-off to the OFF position, then remove the sediment cup and O-ring.
2. Wash the sediment cup in non-flammable solvent, and dry it thoroughly.
3. Place the O-ring in the fuel shut-off, and install the sediment cup. Tighten it securely.
4. Move the fuel shut-off to the ON position, and check for leaks. Replace the O-ring if there is any
leakage.
How to Service the Air Filter (figure 1)
1. Remove the air cleaner outside cover (A). Be careful to prevent dirt and debris from falling into the
air cleaner assembly.
2. Separate the Air Filter (A) from the Air Filter Housing (B).