Product Manual

Page 23 of 35
3. Inspect the air filter. Clean dirty air filter with warm water and mild soap. Allow air filter to dry
thoroughly before re-installation
4. Install the air filter assembly onto the carburetor and secure with screw.
Note: Do not use pressurized air or solvents to clean the filter. Pressurized air can damage the filter
and solvents will dissolve the filter.
figure 1 figure 2
How to Remove Oil
WARNING
When you drain the oil from the oil drain plug, the fuel tank must be empty or fuel can leak out and
result in fire or explosion. To empty the fuel tank, run engine until it stops from lack of fuel.
CAUTION
Used oil is a hazardous waste product and must be disposed of properly. Do not discard with
household waste. Check with your local authorities, service center, or dealer for safe
disposal/recycling facilities.