Manualshelf

Use and Care Manual

ManualsBrandsPowerland ManualsOutdoors10,000-Watt 16-HP Gasoline Powered Electric Start Portable Generator with Auto Idle Control
21222324252627282930
21
5. Measure the plug gap with a feeler gauge.
Correct as necessary by carefully bending the side electrode.
The gap should be: 0.028-0.031 in (0.70--0.80 mm)
PLUG CAP
SPARK PLUG WRENCH
0.028-0.031 in
(0.70-0.80mm)
7. Check that the spark plug washer is in good condition, and thread the sparkplug in by hand
to prevent cross-threading.
8. After the spark plug is seated, tighten with a spark plug wrench to compress the washer.
— If installing a new spark plug, tighten 1/2 turn after the spark plug seats to compress the
washer. If reinstalling a used spark plug, tighten 1/8-1/4 turn after the spark plug seats to
compress the washer.
NOTICE: The Spark plug must be securely tightened. An improperly tightened Spark plug
can become very hot and could damage the engine. Never use spark plugs which
have an improper heat range. Use only the recommended Spark plugs or
equivalent.