Use and Care Manual

Graphic 10

5.5 Cleaning Sediment Cup

See Graphic 11

5.5.1 Turn the fuel valve off.

5.5.2 Remove the sediment cup (a) and the O-ring (b).

5.5.3 Wash both thoroughly in a nonflammable solvent. Dry and reinstall them.

5.5.4 Turn the fuel valve on and check for leaks.

Graphic 11

5.6 Adjusting Idle Speed

See Graphic 12

WARNING: Remove the drive belt before making any adjustment to the

carburetor. See Belt Replacement. The blades will engage unless the belt is