Use and Care Manual

22
NOTE: Snow thrower features and components vary by model. NOT all parts listed above and pictured on the previous page
are standard equipment.
1 Washer,Bell,ij20×ij10.5×2
2 Shells PadM10
3. Hex Screw,3/8-16×27 l=44 S=14
4 Screw,Self-tapping5/16-18×19 S=12.5
5 Washer,Bell,
6 Crank Assembly,Chute
7 Nut,Flange Locking Hexagon5/16-18 S=12.5
8. Plastic ball
9. Handle,Lower,Snow
10 Nut,Plum Plastic
11 Bolt,Plum,Plastic
12 Hand,Upper,RH
13 Screw,Carriage,5/16-18×51 dk=18
14 Screw,Self-tapping,1/4-20×20 l=38 S=11
15 Screw,Shoulder,10#-24×34 Dyke=ij9
16 Nut,Hex Look,10#-24 S=9.5
17 Handle,Upper,RH
18 Hand Gel
19 Nut,Flange Locking Hexagon,1/4-20 S=10
20 Handle,Upper,LH
21 Handle,Clutch Look,RH
22 Handle,Clutch Look,LH
23 Hand,Upper,LH
24 Nut,Flange Locking Hexagon,1/4-20 S=10
25 Connecting Block,Stall lines
26 Pin,Cotter,ST10#-14×13 S=8
27 Rubber Plug,Buffer
28 Significant Tailgate
29 Nut,Flange Locking Hexagon,5/16-18 S=12.5
30 Bolt,Shoulder
31 Flat Padij20×
ij10.5×2
32 Spring,Compresionij2.7×
ij
20×20
33 Nut,Flange Lock,5/16-18 S=12.5
34 Lever,Shift,Speed
35 Supporter
36 Rotation Axis
37 Washer,Bellij24×ij13×2
38 Ring E-Type,GB/T894.2 12
39 Locked-Washer,Saddle
40 Spring Compression,ij0.8
×ij18.5×17
41 Bushing