Use and Care Manual

26
NOTE: Snow thrower features and components vary by model. NOT all parts listed above and pictured on the previous page
are standard equipment.
81=kd4×8×8-31×81-61/5,egairraC,tloB.23gniraeB,gnisuoH.1
5.21=S81-61/5,kooLxeH,tuN.33egnalF,gnihsuB.2
3. Washer,Bell,ij38×ij19.2×0.8
34. Shoe,Slide
41=S61-8/3,kooLxeH,tuN.53egnalF,gnihsuB.4
evahS,etalP.63HL,ylbmessAlaripS.5
5.9=S91×02-4/1gnippaT-fleS,wercS.73recapS.6
ylbmessArellepmI.83niPraehS.7
noisneT,mrA.93elyts-B,niP.8
9. Washer,Bell,ij38×ij looTtuOnaelC,tnuoM.044×8
looTtuOnaelC.14edistuO,liO,laeS.01
11. Housing.Auger,LH Reduced
42. Nut,Flange Lock, Plum
81=kd15×81-61/5egairraC,tloB.34liO,laeS.21
13. Hex Screw, 5/16-24×22 S=12.5
44. Nut,Flange Lock, Non-Metallic Piecesl5/16-18
S=12.5
rewoL,etuhC.54llamS,egnalF,gniraeB.41
15. Washer,Flatij28×ij reppU,etuhC.645.1×31
teviR.74mroW,tfahS.61 ij4x7
rewoL,etuhC,teksaGcitsalP.84lewoD,niP.71
mulP,pihC-kcaBylnO.94tsurhT,ralloC.81
elisneT,gnirpS.05ylbmessAyelluP.91 ij1.2×ij10×60
-31×61-8/3,kooLxeH,tuN.15giB,egnalF,gniraeB.02 ij15.8×4.3 S=24
21. Nut,Hex Look,5/16-18 S=12.5
52. Nut,Hex Look,3/8-16×13-ij15.8×4.3 S=24
41=S61-8/3,kooLxeH,tuN.358M,lleB,rehsaW.22
yelluPreldL.450101KH,gniraeB.32
24. Nut,Hex Look,5/16-18×16-ij10×16.5 S=12.6
55. Bearing,6204ABX-3/3
5.21=S81-61/5,kooLxeH,tuN.65liO,laeS.52
26. Sliding Bearing, Knife Shaft 57. Pulley Adapter
27. Washer,Bell,ij38×ij19.2×0.8 58. Hoursing,Bearing
,epyT-evaW,teksaG.95orp-iH,yeK.82 ij23×ij17×0.5
-61×61-8/3,kooLxeH,tuN.06mroW.92 ij12.5×8 S=19
30. Housing,Auger,RH Reduce
61. Nut,Hex Look,3/8-16 S=14
31. Cutter Axis