Use and Care Manual

SECTION 2: ASSEMBLING YOUR SNOW THROWER

NOTE: References to right or left side of the snow

thrower are determined from behind the unit in the

operating position (standing directly behind the snow

thrower, facing the handle panel).

NOTE: This Operator’s Manual covers several

models. Snow thrower features vary by model.Not

all features referenced and pictured in this manual are

applicable to all snow thrower models.

CAUTION: Prior to operating your snow

thrower, refer to Auger Control Test.

Read and follow all instructions carefully and

perform all adjustments to verify your snow

thrower is operating safely and properly.

Securing the Handle

Based on the strength of the travelling cable, insert the

travelling cable and snow throwing cable to the proper

plugs, and check if machine works properly.