MSDS

Safety Data Sheet
Powermate VX Air Tool Oil
Revision Date: 7/8/19
Prepared according to Global Harmonized System (GHS) standards
SECTION 1
Product Trade Name:
CAS Number:
Synonyms/Other:
Recommended Use:
Restrictions on Use:
Created Date:
Preparation/Revision Date:
Emergency Phone Number:
SDS CODE:
SECTION 2
Appearance:
Odor:
Classification:
Target Organs:
Pictogram(s):
None required.
Signal Word:
Hazard Statement:
Other Hazards:
Prevention:
Response:
Storage Procedures:
Disposal:
Other:
SECTION 3
SECTION 4
Eye Contact:
Skin Contact:
Inhalation:
Ingestion:
Other:
5/20/2015
None required.
None required.
COMPOSITION OF INGREDIENTS
CHEMICAL PRODUCT IDENTIFICATION
None required.
None required.
See section 11 for complete health hazard information.
None required.
Not required.
Not determined.
Yellow to amber fluid
Not Determined
Lubricant
N/A
Mixture
1-800-424-9300 (CHEMTREC)
7/8/2019
10346
HAZARD IDENTIFICATION
Not applicable.
This material is not considered to be hazardous according to the Globally Harmonized
System of Classification and Labelling Chemicals (GHS).
Mild petroleum
Sanborn Mfg, a Division of MAT Industries, LLC
118 West Rock Street
Springfield, MN 56087
Get medical advice or attention if you feel unwell or are concerned.
If you feel unwell or concerned: Get medical advice/attention. Rinse mouth. Do NOT
induce vomiting. If vomiting occurs naturally, lie on your side, in the recovery position.
Call a doctor if you feel unwell.
If irritation occurs, cautiously rinse eyes with lukewarm, gently flowing water for 5
minutes, while holding the eyelids open. If eye irritation persists: Get medical
advice/attention.
FIRST AID MEASURES
No additional information
Powermate VX Air Tool Oil
Components: No Hazardous Substance(s) or Complex Substance(s) required for disclosure.
Page 1 of 6