Use and Care Manual

Routine Maintenance (Continued)

• Save all instructions

Earth Blade and Fishtail Point:

WARNING

1. Use only the manufacturer’s replacement part intended for this Auger Bit. Do not use any other Earth Blade or Fishtail

Point. To install any other brand part to this Auger Bit can result in serious personal injury. Replace worn or damaged Earth

Blade or Fishtail Point.

2. Auger blades and drilling points are sharp. Avoid contact with the auger bladed and drilling points while replacing or

sharpening and while installing auger bit, starting or transporting the unit.

1. Remove the mounting hardware (bolts and nuts), and

take off the earth blade (see Figure 7).

2. Install new Earth Blade with new mounting hardware.

3. Tighten the bolts to secure blade.

4. To Replace the Fishtail Point, unscrew the point using

an adjustable wrench to grip the side of the Fishtail Point.

Replace with new part

(see Figure 8).

Fig.7

Fig. 8