Use and Care Manual

ENG - 9

Assembly (Continued)

• Save all instructions

Step 2: Attach Support Leg to the Tow Bar

1. Attach the support leg (#6) to the tow bar (#1) secure

using a hex bolt M10x95 (#5), at washer Ø10 (#3), Ny-

lon lock nut M10 (#2) and lock pin A (#4). (See g. 3)

Step 3: Attach Tow Bar to the Hydraulic Tank

1. Attach the tow bar (#1) to the hydraulic tank and secure

using two hex bolts M12x100 (#4), at washer Ø12 (#3)

and nylon lock nut M12 (#2). (See g. 4)

Step 4: Attach the Beam Assembly

1. Attach the beam assembly (#1) to the hydraulic tank and

secure using the hinge pin (#2 and R-Pin Ø3 (#3).

(See g. 5)

2. Rotate beam to horizontal position and secure with front

lock pin.

Figure 5

Figure 3

Figure 4