Use and Care Manual

ENG - 8 ENG - 9

Assembly (Continued)

• Save all instructions

Step 2: Attach Support Leg to the Tow Bar

1. Attach the support leg (#6) to the tow bar (#1)

secure using a hex bolt M10x95 (#5), at washer

Ø10 (#3), Nylon lock nut M10 (#2) and lock pin A

(#4). (See g. 3)

Step 3: Attach Tow Bar to the Hydraulic Tank

1. Attach the tow bar (#1) to the hydraulic tank and

secure using two hex bolts M12x100 (#4), at

washer Ø12 (#3) and nylon lock nut M12 (#2).

(See g. 4)

Step 4: Attach the Beam Assembly

1. Attach the beam assembly (#1) to the hydraulic tank

and secure using the hinge pin

(#2 and R-Pin Ø3 #3). (See g. 5)

2. Rotate beam to horizontal position and secure with

front lock pin.

Figure 5

Figure 3

Figure 4