Replacement Part List

Assembly (Continued)

• Save all instructions

If you need assistance or find any parts missing, CALL

TOLL FREE: 1-800-737-2112.

ATTACH LOWER HANDLE (See Figure 4)

1. Loosen the lower handle bolts, if required.

2. Align the lower handle holes to the middle height

adjustment holes in the transmission cover and install

the M10 X 25mm bolts, flat washers, lock washers and

nuts. Tighten all four bolts at this time.

ATTACH UPPER HANDLE (See Figure 5)

1. Slide the upper handle down over the lower handle and

align the holes.

2. Insert the saddle bolts into the holes as shown and secure

with the handle knobs.

3. Tighten the handle knobs securely.

4. Secure control cables to handle using cable ties.

Saddle Bolts

Handle Knobs

Figure 5

Transmission Cover

Height

Adjustment

Holes

Lower Holes

Figure 4