Replacement Part List

Depth Regulator

Bracket

Depth Regulator

Lever

Figure 3

Wheel lock pin in tiller operating position

(wheel hub and axle holes)

FRONT

Figure 2

Assembly Instructions

Assembly (Continued)

• Save all instructions

If you need assistance or find any parts missing,

CALL TOLL FREE: 1-800-737-2112.

The tiller comes fully assembled except for a few parts.

The following instructions will help you complete the tiller

assembly.

INSTALL THE WHEELS (See Figure 2)

1. Assure cupped washer is installed onto wheel axle.

2. The tiller wheels are directional. For best performance

install the wheels with the tire thread facing the direction

as shown.

3. Slide the wheel hub onto the wheel axle.

4. Align the wheel hub hole with the hole in the axle and

insert the locking pin.

5. Rotate the locking pin ring to lock the pin in position.

INSTALL THE DEPTH REGULATOR (See Figure 3)

1. Insert the depth regulator into the bottom of the depth

regulator bracket.

2. Insert the pin through the bracket and lever.