Instruction Manual

4� Add RV antifreeze or windshield washer uid to hose

as shown. (Fig. 14)

5� Pull engine starter rope slowly several times until

antifreeze/ washer uid comes out of high-pressure

hose connection of pump�

6� Remove garden hose from water inlet of pump�

7� Reconnect spark plug wire.

STORAGE

• SAVE ALL INSTRUCTIONS

ENGINE

Consult the Engine Owners Manual for the manufacturer’s

recommendations for storage�

PUMP

The manufacturer recommends using a pump protector/

winterizer when storing the unit for more than 30 days and/

or when freezing temperatures are expected� If a pump

protector/winterizer is not available, RV antifreeze or wind-

shield washer uid needs to be run through the pump as

outlined in the steps below�

NOTE: Using a pump protector/ winterizer, RV antifreeze

or windshield washer uid is to provide proper lubrication

to the internal seals of the pump regardless of tempera-

ture or environment�

1� Obtain a funnel, 6 oz� of RV antifreeze or windshield

washer uid, and 16–36” of garden hose with a male

hose connector attached to one end�

CAUTION

RISK OF PROPERTY DAMAGE. Use only

RV antifreeze. Any other an ti freeze is corrosive and

can damage pump.

2� Disconnect spark plug wire.

3�

Connect length of garden hose to water inlet of pump.

REPAIRS

• SAVE ALL INSTRUCTIONS

To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment should be performed by an Autho-

rized Warranty Service Center� Always use identical replacement parts� For the location of the nearest Authorized War-

ranty Service Center call 1-888-895-4549 or visit our website www�powermate�com�

FIG. 14