User Manual

6
Features
Figure 1
Specifications
Model Number ............................................................................................ 15S..................................................... 15HH
S toc k Numb e r ..................................................................................... 1 791 21 0................................................ 1 7 9121 3
Maximum Cutting Width (in.) ................................................................. 14-7/8.................................................... 14 -7 /8
Maximum Cutting Thickness (in.) ................................................................. 6............................................................ 6
Full Width Cutting Depth (in.) ..................................................................... 1/8......................................................... 1/8
Minimum Planing Length (in.) ....................................................................... 8............................................................ 8
Minimum Stock Thickness (in.) ................................................................ 3/16....................................................... 3/16
Table movement per one revolution of handwheel ................. 0.079” (2mm)........................................ 0.079” (2mm)
Knives ............................................................................................................. 3 .......................... 74 four-sided inserts
Number of cutterhead rows ........................................................................... --............................................................ 5
Cutterhead Speed (RPM) ....................................................................... 4,500..................................................... 4,500
Cuts per Minute ..................................................................................... 13,500....................................... not applicable
Cutterhead Diameter (in.) ........................................................................ 2-7/8...................................................... 2-7/8
Sound Rating @ 2” distance (dB) ...................................................... 82 to 85................................................. 80 to 84
Knife Insert Screw Max. Torque (pound force–inch) ............................... -----................................................. 45 to 55
Feed Rate (FPM) .............................................................................16 and 20..............................................16 and 20
Motor ............................................................... TEFC, 3HP, 1Ph, 230V, 60Hz............ TEFC, 3HP, 1Ph, 230V, 60Hz
Dust Chute Diameter (in.) .............................................................................. 4............................................................ 4
Overall Dimensions, Assembled (LxWxH)(in.).................... 48 x 28 x 43-1/2................................... 48 x 28 x 43-1/2
Cabinet Footprint, including foot pedal (LxW)(in.) .......................23-1/2 x 23............................................23-1/2 x 23
Net Weight (lbs.)......................................................................................... 507........................................................ 502
Shipping Weight (lbs.)................................................................................ 573........................................................ 568
The above specifications were current at the time this manual was published, but because of our policy of
continuous improvement, Walter Meier (Manufacturing) Inc., reserves the right to change specifications at any
time and without prior notice, without incurring obligations.