Use and Care Manual

Unpacking

Open both cartons and check for shipping

damage. Report any damage immediately to

your distributor and shipping agent. Do not

discard any shipping material until the Stock

Feeder is assembled and running properly.

Compare the contents of the cartons with the

following parts list to make sure all parts are

intact. Missing parts, if any, should be reported

to your distributor. Read the instruction manual

thoroughly for assembly, maintenance and

safety instructions.

Contents of the Shipping Container

Carton #1:

1 Stock Feeder

1 Grease Gun (grease not included – follow

instructions on its packaging to fill)

1 Boring Template

1 Owner's Manual (not shown)

1 Warranty Card (not shown)

Carton #2:

1 Feeder Mounting Assembly

1 Handle

1 Over Arm

1 Over Arm Cone Assembly

4 Hex Cap Screws, M12x50 (not shown)

4 Spring Washers, M12 (not shown)

Figure 2

Read and understand the entire contents of this manual before attempting set-up

or operation! Failure to comply may cause serious injury.