Product Manual

26
14.0 Recommended lathe speeds (per diameter of workpiece)
Diameter of Work Roughing RPM General Cutting RPM Finishing RPM
Under 2” 1520 3000 3000
2” to 4” 760 1600 2290
4” to 6” 510 1080 1500
6” to 8” 380 810 1125
8” to 10” 300 650 900
10” to 12” 255 540 750
12” to 14” 220 460 640
14” to 16” 190 400 560
16” to 20” 175 325 450
20” to 24” 175 260 375
Table 3
15.0 Replacement parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-
274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model Number and Serial Number of
your machine available when you call will allow us to serve you quickly and accurately.
Non-proprietary parts, such as fasteners, can be found at local hardware stores, or may be ordered from
Powermatic.
Some parts are shown for reference only, and may not be available individually.