Product Manual

5
4.0 Specifications
Table 1
Model number
3520C
Stock number 1353001
Motor and Electricals
Motor type Totally enclosed, fan-cooled, induction
Horsepower 2HP (1.5 kW)
Motor phase 3
Motor voltage 220 V
Cycle 60 Hz
Listed FLA (full load amps) 6.2 A
Input power requirements
230V, 1 phase
Drive system Poly V belt, E-type inverter drive, 2-step pulley
VFD input amperage 10 A , 1PH
VFD output to motor 7.5A (3PH)
Power cord Not supplied
Power plug Not supplied
Recommended circuit size
1
20 A
Sound emission without load
2
78 dB at 20 inches (508mm) from motor
Capacities
Working distance between centers 36 in. (91 cm) with dual bearing center
Working distance between centers, 20” bed extension mounted 56 in. (142 cm) with dual bearing center
Maximum distance between spindle face and tailstock quill 40-5/8 in. (103 cm)
Swing over bed 20” (508 mm)
Swing over toolrest base 15-3/4 in. (400 mm)
Maximum outboard turning, optional bed extension in low position
38 in. (965 mm)
Headstock and spindle
Spindle speeds (RPM) low 15-1200; high 40-3200
Spindle thread size 1-1/4” x 8 TPI
Spindle direction forward/reverse
Headstock spindle taper #2 Morse
Hole through headstock spindle, diameter 5/8” (16 mm)
Outboard external threads 1-3/16”–18 UNC
Indexing positions 48
Faceplate 3 in. (76.2 mm)
Tailstock
Tailstock quill taper #2 Morse
Hole through tailstock quill, diameter 3/8” (9.5 mm)
Tailstock quill travel 4-1/2” (114 mm)
Tailstock quill thread ACME TR20-4
Tool rest
Tool rest width 14 in. (356 mm)
Tool rest locking Bushing
Main materials
Headstock body Cast iron
Bed Cast iron
Legs Cast iron
Tool rest Ductile iron, FCD45
Tool rest base Cast iron
Comparator brackets Cast iron
Face plate Cast iron