Product Manual

6
Dimensions
Overall size assembled LxWxH 69-1/2 x 34 x 36-1/2 x 47 in. (+4 in. riser block)
[1766 x 92 x 119 cm (+10 cm riser block)]
Distance floor to spindle centerline (adjustable using levelers) 40-5/8 in. (103 cm) +4 in/10cm riser block)
Bed gap 2.5 in. (63.5 mm)
Footprint of stand 51-3/4”L x 24”W (1315 x 610 mm)
Tool support post diameter 1” (25.4mm)
Riser block height 4” (102 mm)
Weights
Net weight 726 lb. (330 kg)
Shipping weight 770 lb. (350 kg)
1
subject to local/national electrical codes.
2
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, Powermatic reserves the right to change specifications at any time and without prior notice, without
incurring obligations.