Table Saw Specification Sheet

Accu-Fence
Note: The POWERMATIC Accu-Fence is available with 30”
or 50” capacity to the right of the blade. Aside from capacity,
both Accu-Fence systems are identical in construction and
features.
A key feature of any table saw is the fence system. To
maximize accuracy and safety, the POWERMATIC PM2000
comes with the POWERMATIC exclusive Accu-Fence. Based
on the venerable T-square design, the POWERMATIC Accu-
Fence takes this concept to new levels.
Even high-end fence systems are based on a length of square or
rectangular steel with laminate-covered wooden faces.
Manufacturing tolerances in the tubing itself require shimming
to straighten the face material mated to it. POWERMATIC takes
the extra step of milling the square tubing to be sure that it and
the face it supports are straight without having to be shimmed.
The Powermatic Accu-Fence takes t-
square fence systems to a new level
of accuracy.
In place of the common laminate-covered wood, the
POWERMATIC Accu-Fence has a pair of ¾”-thick HDPE
(high density polyethylene) slabs that are both very rigid and
have exceptional lubricity properties that allows wood to slide
along them easily and predictably. The faces can be adjusted
vertically to either ride just above the table or flush with the surface, whichever is safest for the
material being cut. Oversized access holes along the
A heavy steel T-square is welded
to the main fence tube and includes
adjusters and a magnified cursor
over the easy to read scale.
underside of the Accu-Fence make reaching the fasteners to remove or reposition the HDPE
faces much easier.
The T-square portion of the Accu-Fence is made from heavy-gauge steel
and is precisely welded to the main tube. Easy to use adjusters allow
fine-tuning Accu-Fence square to the table surface (vertically) and
parallel to the miter slots.
The single handle locking mechanism is made using high-tech powdered
metal technology that allows forming extremely precise parts. The
powdered metal process also produces exceptionally tough parts that
resist wear and retain their effectiveness indefinitely.
The Accu-Fence rides on a heavy gauge steel support tube and rail
system that insures precision and durability. A high-tech powder coating
process keeps the guide tube and rails protected and looking great. To
provide clean metal-to-metal contact areas for the fence locking
mechanism to grip along the guide tube, strips of the powder coating are precisely machined
away.
The locking handle and
mechanism are simple,
tough and very easy to
operate.