Use and Care Manual

9
Main materials
Main table cast iron
Table insert aluminum
Extension wings cast iron
Cabinet steel
Base steel
Center trunnion cast iron
Bearing arm cast iron
Pulleys steel
General Dimensions
Base footprint 23 x 28 in. (584 x 711 mm)
Assembled, w/ extension wings only, L x W x H 42-5/8 x 32-3/4 x 40-3/8 in. (1083 x 832 x 1026 mm)
Assembled, with 30-in. rail set, L x W x H 66-3/4 x 39-1/8 x 40-3/8 in. (1694 x 993 x 1026 mm)
Assembled, with 50-in. rail set, L x W x H 84-3/4 x 39-1/8 x 40-3/8 in. (2151 x 993 x 1026 mm)
Caster elevation (approximate) 3/4 in. (19 mm)
Shipping dimensions, saw only, L x W x H 29-7/8 x 33 x 43-1/2 in. (760 x 840 x 1105 mm)
Weights
Saw only – net weight 385 lb. (175 kg) 405 lb. (184 kg) 398 lb. (181 kg)
Saw only – shipping weight 535 lb. (243 kg) 555 lb. (252 kg) 548 lb. (249 kg)
1
Note: For 460V operation, an overload relay (Part No. PM2000B-2107BORA) must be purchased separately and
installed. A qualified electrician is recommended.
2
subject to local/national electrical codes.
3
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height, D = depth
n/a = not applicable
5.1 Kit configurations
Stock numbers
Saw only
PM231B PM251B PM253B
Saw with 30-inch rail set, wood ext table PM23130K PM25130K PM25330K
Saw with 50-inch rail set, wood ext table PM23150K PM25150K PM25350K
Saw with 50-inch rail set & router lift PM23150RK PM25150RK PM25350RK
Saw with 50-inch rail set & workbench PM23150WK PM25150WK PM25350WK
Table 2
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, Powermatic reserves the right to change specifications at any time and without prior notice,
without incurring obligations.