Use and Care Guide

13
HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Preparing the Remote Control
Pairing the Remote Control
NOTE: The remote control has already been paired to the ceiling
fan for your convenience. If you have two of the same model fans
in your home, please follow the steps below to control each fan
independently.
□ Press the large arrow rmly to slide the battery compartment cover
off. Insert the battery (N) and put the cover back on.
□ Conrm that the power to the fan is off at either the wall switch or
breaker box.
□ Return power to the fan at the wall switch or breaker box.
□ Press and release the “Learn” button located in the remote’s
battery compartment within 30 seconds.
□ If pairing is successful, the fan’s light kit will ash and the blades
will begin to spin.
□ Replace the battery cover on the remote control.
WARNING: a) The cells shall be disposed of properly, including
keeping them away from children; b) even used cells may cause
injury.
Assembly - Attaching the Wall Bracket (optional)
Mounting the remote control holder
□ Slide the screw cover plate up to remove it from the wall
cradle (M).
□ Position the wall cradle (M) in the desired position and attach
it to the wall using the included wall mount screws (PP).
□ Slide the screw cover plate back onto the wall cradle (M) to
conceal the screws.
NOTE: Screw wall anchors are included for extra support. The
included screws are designed to screw easily into the wall. If
you would like a more permanent or secure hold, install the wall
anchors prior to attaching the wall cradle (M) to the wall.
Sc
rew cover plate
M
PP
OO