PMX-1000W-PSW Full Specification

POWER INVERTER SPECIFICATION

1. Introduction：The Product is to invert 12V DC to 115V AC, meet to 120V AC electronic

appliance safety operating standard. It can be used to power most electronic appliances or

equipments.

2. Product characteristic

2.1 Appearance: Aluminum housing

2.2 Electronic performances：The inverter provides high efficiency output and powerful

starting capability, digital control, pure sine wave output . Added safety features include DC

voltage detect, high/low voltage alarm,high/low voltage protection and auto-reset , overload

protection, short circuit protection and auto-reset, with USB, remote function( on off by remote),

power display. The inverter will shut down if the internal temperature gets too hot and can be

automatically reset after it cools down.

3. Specification： (Test condition：Ambient Temperature 23℃±2℃，Humidity 40％－90 ％

RH. Input DC12.5V)

3.1 MAX. continuous Output Power 1000 Watt

3.2 DC Input Static Current(No Load) ≤1.5Amp

3.3 Ac Output Wave Form Pure Sine Wave

3.4 Low Voltage Alarm 10.5±0.5V

3.5 Low Voltage Cut Off Level 10V±0.5V

3.6 Auto-reset after shut-down 12 V±0.5V

3.7 High Voltage Cut Off Level 15V-16.5V

3.8 Output AC Voltage AC 115V±10%. RMS

3.9 Output Frequency Level 60 ± 1HZ

3.10 Overload Power Range 1000 Watts +5% - +30%

PAGE 1
POWER INVERTER SPECIFICATION 1. Introduction：The Product is to invert 12V DC to 115V AC, meet to 120V AC electronic appliance safety operating standard. It can be used to power most electronic appliances or equipments. 2. Product characteristic 2.1 Appearance: Aluminum housing 2.2 Electronic performances：The inverter provides high efficiency output and powerful starting capability, digital control, pure sine wave output .
PAGE 2
3.11 USB Power Port Output V/A DC4.7-5.3V/ 2100mA 3.12 Full Load Optimum Efficiency 3.13 Ac Output Short Circuit Protection system shut down (no damage) ＜65℃ 3.14 Temperature Protection 3.15 ≥80% Fan Run depend on inner temperature rising up 3.16 Led Indicate ≥45℃ normal : Green fault: Red 4. Display 4.1 Output Power Indicator 5.