PMX-2000W-PSW Spec Sheet

POWER INVERTER SPECIFICATION

1. Introduction：The Product is to invert 12V DC to 115V AC, meet to 120V AC electronic

appliance safety operating standard. It can be used to power most electronic appliances or

equipments.

2. Product characteristic

2.1 Appearance: Aluminum housing

2.2 Electronic performances：The inverter provides high efficiency output and powerful

starting capability, digital control, pure sine wave output . Added safety features include DC

voltage detect, high/low voltage alarm,high/low voltage protection and auto-reset , overload

protection, short circuit protection and auto-reset, with USB, remote function( on off by remote),

power display. The inverter will shut down if the internal temperature gets too hot and can be

automatically reset after it cools down.

3. Specification： (Test condition：Ambient Temperature 23℃±2℃，Humidity 40％－90 ％

RH. Input DC12.5V)

3.1 MAX. continuous Output Power 2000Watt

3.2 DC Input Static Current(No Load) ≤1.5Amp

3.3 Ac Output Wave Form Pure Sine Wave

3.4 High Voltage Cut Off Level 15-16.5Volt

3.5 Low Voltage Alarm 10.5±0.5V

3.6 Auto-reset after shut-down 12 V±0.5V

3.7 Low Voltage Cut Off Level 10±0.5V

3.8 Output AC Voltage AC 115±10﹪V.

3.9 Output Frequency Level 60 ± 1HZ

3.10 Overload Power Range 2000 Watts +5% - +30%

3.11 USB Power Port Output V/A DC4.7-5.3V/ 2100mA

3.14 Ac Output Short Circuit Protection system shut down

(no damage)

page 1 of 2

PAGE 1
POWER INVERTER SPECIFICATION 1. Introduction：The Product is to invert 12V DC to 115V AC, meet to 120V AC electronic appliance safety operating standard. It can be used to power most electronic appliances or equipments. 2. Product characteristic 2.1 Appearance: Aluminum housing 2.2 Electronic performances：The inverter provides high efficiency output and powerful starting capability, digital control, pure sine wave output .
PAGE 2
3.15 Full Load Optimum Efficiency 3.16 Fan Run ≥80% ＜65℃ 3.12 Temperature Protection 3.17 Led Indicate 3.18 ≥45℃ depend on inner temperature rising up Normal：Green Fault：Red Fuse (spade type) 35A *8Pcs 1. Display 4.1 Output Power Indicator 5. 8 Green LED indicate,step 0Watts,up to 1800Watts 1 orange LED indicate,step 1200Watts,up to 1800Watts 1 red LED indicating,The output load more than 1800Watts Environmental condition 5.1 Operating temperature 0-40℃ 5.