Instructions / Assembly

ManualsBrandsPowerplay ManualsCorded Electric Pressure WashersSpyder Pro 2700 PSI 1.3 GPM 14 Amp Cold Water Electric Pressure Washer with 1000 ml High Pressure Foam Cannon

Questions, problems, missing parts?

Before returning to your retailer, contact our customer service department at 1-855-770-7529 or

custserv@powerplaypro.com, 8:00 a.m. - 4:00 p.m., EST, Monday - Friday. www.powerplaypro.com

SPYP09 REVISION-1-1222

Electric Pressure Washer

Assembly, Care and Use Instructions

Read carefully. Retain these instructions and

attach receipt to manual for future reference.

ALWAYS WEAR EYE PROTECTION TO

PREVENT INJURY TO EYES WHEN

OPERATING THE POWER WASHER.

Summary of content (9 pages)

PAGE 1
Electric Pressure Washer Assembly, Care and Use Instructions Read carefully. Retain these instructions and attach receipt to manual for future reference. ALWAYS WEAR EYE PROTECTION TO PREVENT INJURY TO EYES WHEN OPERATING THE POWER WASHER. Questions, problems, missing parts? Before returning to your retailer, contact our customer service department at 1-855-770-7529 or custserv@powerplaypro.com, 8:00 a.m. - 4:00 p.m., EST, Monday - Friday. www.powerplaypro.
PAGE 2
Table of Contents Package Contents Package Contents............................................................................................................................... 2 C O Product Specifications...................................................................................................................... 2 B Safety Information.............................................................................................................................. 3 E D A1 GFCI..............
PAGE 3
Safety Information Safety Information • DO NOT touch the high pressure spray with your fingers, hands, feet and be careful to avoid any contact with your eyes as the powerful spray can cause blindness or blast holes in the skin. • ALWAYS wear eye protection to prevent injury to eyes when operating the power washer. • To avoid accidents causing injury, ALWAYS use the trigger safety lock when the power washer is not in use even if the spraying stops for a moment.
PAGE 4
Assembly Instructions Assembly Instructions Estimated Assembly Time: 10 minutes Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and hardware contents list. If any part is missing or damaged, DO NOT attempt to assemble the product, contact customer service at 855-770-7529 or custserv@powerplaypro.com 3 Slide foam cannon bracket (N) onto tabs on left side of power washer unit (D).
PAGE 5
Assembly Instructions Assembly Instructions 9 6 To remove the hose, twist collar counter clockwise then pull back to release the hose (G) connection from the spray gun (H). Spray Tips (K) storage is on left side of pressure washer. D H 1 2 G K 2 3 G 10 7 To lock the trigger of the spray gun (H), aim the gun away from you and pull up on the safety lock (I). After doing so, squeeze or pull the trigger to make sure it is locked and will not move. ALWAYS keep spray gun (H) locked when not in use.
PAGE 6
Assembly Instructions Important Initial Startup 12 Attach spray tips (K) or turbo nozzle (L) into end of lance (J) by pressing selected tip into place. It will make a “click” sound when firmly in place. K 1 1. Ensure wheel brakes are OFF (lever in UP position) to roll. Lever in DOWN position locks the wheels. 1. Release the spray gun safety lock (I) on the spray gun (H). 2. Remove spray tips or Adaptivewash™ nozzle from the lance. 3.
PAGE 7
Operating Instructions Care and Maintenance Using Detergents Using the Foam Cannon • When using detergent, fill foam cannon with a properly formulated detergent-to-water ratio, following instructions on the container. • Use detergents designed for high pressure power washers. Hardware stores or home centers may offer detergents for different cleaning projects. The cleaning solution should be the consistency of water in order to prevent foam cannon from clogging.
PAGE 8
Care and Maintenance Warranty The two-year limited consumer warranty of this product is covered by Powerplay Corporation. Problem Corrective Action Unit will not turn on. 1. Make sure the power washer is OFF. Plug the electrical cord into a grounded 120 volt outlet. If the electrical cord will not plug into your outlet, your electrical outlet is not properly grounded and should not be used. Use another electrical outlet. 2. Pull trigger on gun to ensure water flow. 3.
PAGE 9
Replacement Parts For replacement parts, call our customer service department at 1-855-770-7529. 8:00 a.m. - 4:00 p.m., EST, Monday - Friday or order online at www.powerplaypro.com. C P USA Model B E A1 N G Laveuse à pression électrique O F Instructions d’assemblage, d’entretien et d’utilisation O-Ring Veuillez lire attentivement. Conservez ces instructions et brochez le reçu au manuel pour référence ultérieure.