Operation Manual

ManualsBrandsPowerplus ManualsDrillpow 30060

POW30060 EN

1 APPLIANCE .................................................................................... 2

2 DESCRIPTION (FIG A) ................................................................... 2

3 PACKAGE CONTENT LIST ............................................................ 2

4 SYMBOLS ....................................................................................... 2

5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 3

5.1 Work area ............................................................................................................... 3

5.2 Electrical safety ..................................................................................................... 3

5.3 Personal safety ...................................................................................................... 3

5.4 Power tool use and care ........................................................................................ 4

5.5 Service .................................................................................................................... 4

6 ASSEMBLY ..................................................................................... 4

6.1 Inserting and removing a drill or screw bit (fig. A) .............................................. 4

6.2 Mounting the side grip (fig. A) .............................................................................. 4

6.3 Mounting the depth stop (fig. A) ........................................................................... 4

7 OPERATION.................................................................................... 5

7.1 Selecting the operating mode (fig. A) ................................................................... 5

7.2 Changing the direction of rotation (fig. A) ........................................................... 5

7.3 Adjusting the speed (fig. A) .................................................................................. 5

7.4 Switching on and off (fig. A) ................................................................................. 5

8 TECHNICAL DATA ......................................................................... 5

9 SOUND EMISSION ......................................................................... 5

10 WARRANTY .................................................................................... 6

11 ENVIRONMENT .............................................................................. 6

12 DECLARATION OF CONFORMITY ............................................... 7

Summary of content (7 pages)

PAGE 1
POW30060 EN 1 APPLIANCE .................................................................................... 2 2 DESCRIPTION (FIG A) ................................................................... 2 3 PACKAGE CONTENT LIST............................................................ 2 4 SYMBOLS ....................................................................................... 2 5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 3 5.1 Work area ................................
PAGE 2
EN POW30060 ELECTRONIC HAMMER DRILL POW30060 1 APPLIANCE Your electronic hammer drill has been designed for drilling in wood, metal, plastic, stone and concrete as well as for screwing applications. Warning! Read this manual and general safety instructions carefully before using the appliance, for your own safety. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION (FIG A) 1. 2. 3. 4. On/off-switch Speed adjusting wheel Lock-on button Forward/reverse switch 5. 6. 7.
PAGE 3
POW30060 5 GENERAL POWER TOOL SAFETY WARNINGS EN Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 5.1 Work area § Keep work area clean and well lit. Cluttered and dark areas invite accidents.
PAGE 4
POW30060 EN 5.4 Power tool use and care § Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. § Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. § Disconnect the plug from the power source before making any adjustments, changing accessories, or storing power tools.
PAGE 5
EN POW30060 7 OPERATION 7.1 Selecting the operating mode (fig. A) Select the required operating mode before use (drilling or hammer drilling). § For drilling in wood: metal, plastics and soft stone and for driving screws, slide the switch (5) to the left. § For drilling in concrete or hard stone, slide the switch (5) to the right. Always wait until the motor has come to a complete standstill before changing the operating mode. 7.2 Changing the direction of rotation (fig.
PAGE 6
POW30060 EN 10 WARRANTY § This product is warranted as provided by law for a 24 months period effective from the date of purchase by the first user. § This warranty covers all material or production flaws. It does not include: defective parts subject to normal wear & tear, such as bearings, brushes, cables, plugs or accessories such as drills, drill bits, saw blades etc. ; damage or defects resulting from abuse, accidents or alterations; nor the costs for transport.
PAGE 7
POW30060 EN 12 DECLARATION OF CONFORMITY 08 VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product : ELECTRONIC HAMMER DRILL trade mark : POWERplus model : POW30060 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.