Operation Manual

POW8562 EN
Copyright © 2016 VARO P a g e | 1 www.varo.com
1 APPLICATION .................................................................................. 3
2 DESCRIPTION (FIG. A) ................................................................... 3
3 PACKAGE CONTENT LIST ............................................................. 3
4 SYMBOLS ........................................................................................ 4
5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4
5.1 Working area ........................................................................................................... 4
5.2 Electrical safety ....................................................................................................... 4
5.3 Personal safety ....................................................................................................... 5
5.4 Power tool use and care ......................................................................................... 5
5.5 Service ..................................................................................................................... 6
6 SAFETY EQUIPMENT ..................................................................... 6
6.1 Cleaving wedge ....................................................................................................... 6
6.2 Saw blade protector ................................................................................................ 6
6.3 Push stick ................................................................................................................ 6
7 UNPACKING AND ASSEMBLY ...................................................... 6
7.1 Assembly (Fig. 1) .................................................................................................... 6
7.2 Fitting the parallel fence (Fig. 2)............................................................................. 6
7.3 Attach the tilt protection (Fig. 3) ............................................................................ 6
7.4 Mounting mitre angle stop (Fig. 4) ......................................................................... 6
7.5 Mounting the saw blade guard (Fig. 5) .................................................................. 7
7.6 Mounting the extraction (Fig. 6) ............................................................................. 7
8 OPERATION ..................................................................................... 7
8.1 Check before starting the device! .......................................................................... 7
8.2 Operating elements ................................................................................................. 7
8.2.1 On/off switch ............................................................................................................. 7
8.2.2 Overload Protection (5) ............................................................................................. 8
8.2.3 Setting mechanism for the tilt angle ........................................................................... 8
8.2.4 Hand crank for setting the cutting height ................................................................... 8
8.3 Workpiece stops ..................................................................................................... 8
8.3.1 Mitre angle stop ........................................................................................................ 8
8.3.2 Mitre cuts (Fig. 7) ...................................................................................................... 8