Operation Manual

ManualsBrandsPowerplus ManualsDrillpow x 0157

POWX0153, 0155 & 0157

P a g e | 1

www.varo.com

APPLICATION .................................................................................. 3

DESCRIPTION (FIG. A) ................................................................... 3

PACKAGE CONTENT LIST ............................................................. 3

SYMBOLS ........................................................................................ 4

GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1

Working area ........................................................................................................... 4

5.2

Electrical safety ....................................................................................................... 4

5.3

Personal safety ....................................................................................................... 4

5.4

Power tool use and care ......................................................................................... 5

5.5

Service ..................................................................................................................... 5

ADDITIONAL SAFETY INSTRUCTIONS FOR BATTERIES AND

CHARGERS ..................................................................................... 5

FEATURES ....................................................................................... 6

7.1

Keyless chuck (1) .................................................................................................... 6

7.2

Torque adjustment ring (2) ..................................................................................... 6

7.3

On/off switch (4) ...................................................................................................... 6

7.4

Forward/reverse selector (right/left rotation selector) (7)..................................... 6

7.5

Variable speed (3) ................................................................................................... 7

7.6

Speed selector (3) ................................................................................................... 7

(PRE)OPERATION ........................................................................... 7

8.1

Charging the battery pack ...................................................................................... 7

8.2

Install/remove battery pack. ................................................................................... 8

8.2.1

To install battery pack on your cordless drill ................................................................. 8

8.2.2

To remove battery pack ................................................................................................ 8

8.3

Installing/removing bits .......................................................................................... 8

8.3.1

Installing bits ................................................................................................................ 8

8.3.2

Removing bits .............................................................................................................. 8

8.4

Adjustable torque clutch ........................................................................................ 8

CLEANING AND MAINTENANCE ................................................... 9

9.1

Cleaning................................................................................................................... 9

9.2

Maintenance ............................................................................................................ 9

CHUCK REMOVAL/REPLACEMENT) ............................................ 9

Summary of content (12 pages)

PAGE 1
POWX0153, 0155 & 0157 EN 1 APPLICATION.................................................................................. 3 2 DESCRIPTION (FIG. A) ................................................................... 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 4 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Working area ............
PAGE 2
POWX0153, 0155 & 0157 EN 10.1 Chuck removal: ....................................................................................................... 9 10.2 (Re)tighten a (loose) chuck .................................................................................... 9 11 STORAGE ...................................................................................... 10 12 TECHNICAL DATA ........................................................................ 10 13 SOUND EMISSION .................
PAGE 3
EN POW X0153, 0155 & 0157 POWX0153 CORDLESS DRILL 14.4V POWX0155 CORDLESS DRILL 18V POWX0157 CORDLESS DRILL 21.6V 1 APPLICATION Your rechargeable drill/screwdriver has been designed for drilling in wood, metal and plastics and for screw driving applications It is not designed for commercial use. WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions.
PAGE 4
POW X0153, 0155 & 0157 EN 4 SYMBOLS The following symbols are used in this manual and/or on the machine: Denotes risk of personal injury, loss of life or damage to the tool in case of nonobservance of the instructions in this manual. Warning-to reduce the risk of injury, user must read instruction manual. Fire hazard! Conforms to all regulatory standards in the country EU where the product is purchased. Always wear hearing protection with impact drills. Exposure to noise can cause hearing loss.
PAGE 5
POW X0153, 0155 & 0157 EN Use safety equipment. Always wear eye protection. Using safety equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection whenever it is needed will reduce the risk of personal injury. Avoid accidental starts. Ensure the switch is in the off position before inserting the plug . Carrying power tools with your finger on the switch or plugging in power tools when the switch is in the on position makes accidents more likely.
PAGE 6
POW X0153, 0155 & 0157 6. 7. 8. EN Do not cause short circuits. If connection is made between the positive (+) and negative (-) terminal directly or via accidental contact with metallic objects, the battery is short circuited and an intense current will flow causing heat generation which may lead to casing rupture or fire. Do not heat.
PAGE 7
POW X0153, 0155 & 0157 EN 7.5 Variable speed (3) Your cordless drill has a variable speed switch. The rotational speed and torque will in-/ decrease equivalently to applied trigger pressure. This drill has an electric brake, when the trigger switch is released, the chuck stops turning. 7.6 Speed selector (3) Your cordless drill has a two-speed gear, designed for drilling or driving at LO (1) or HI (2) speed. A slide switch is located on top of your drill to select either LO (1) or HI (2) speed.
PAGE 8
POW X0153, 0155 & 0157 8.2 8.2.1 EN Install/remove battery pack. To install battery pack on your cordless drill Lock the switch trigger (4) on the drill by placing the forward/reverse) selector in its centre position. Place the battery pack in the drill. Align the raised rib on battery pack with the groove inside the drill. (Make sure the latches on each side of your battery pack snap in place and battery pack is secured in the drill before beginning operation.) 8.2.
PAGE 9
POW X0153, 0155 & 0157 EN POW X0157 only: For hammer drilling * Drilling hard smooth surfaces When drilling hard smooth surfaces use a centre punch to mark desired hole location. This will prevent the drill bit from slipping off centre as the hole is started. However, the low speed feature allows starting holes without centre punching if desired. To accomplish this, simply operate the drill at a low speed until the hole is started.
PAGE 10
EN POW X0153, 0155 & 0157 Note: The chuck screw has left hand threads. 11 STORAGE Store it out of the reach of children, in a stable and secure position, in a cool and dry place, avoid too high and too low temperatures. − Battery storage Store and charge your batteries in cool area. Temperatures below 10 °C (50 °F) or above 38 °C (100 °F) will shorten battery life. Never store batteries in discharged condition. Recharge them immediately after they are discharged.
PAGE 11
POW X0153, 0155 & 0157 EN 14 WARRANTY This product is warranted for a 36-month period effective from the date of purchase by the first user. This warranty covers all material or production flaws. It does not include defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects resulting from maltreatment, accidents or alterations; nor the cost of transportation.
PAGE 12
EN POW X0153, 0155 & 0157 17 DECLARATION OF CONFORMITY VARO N.V. Product : Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Cordless Drill 14.4V Cordless Drill 18V Cordless Drill 21,6V Trade mark : POWERplus Model : POWX0153 / POWX0155 / POWX0157 Is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.