Operation Manual

POWXQ5302 EN
Copyright © 2015 VARO P a g i n a | 9 www.varo.com
Protection class
II
No load speed
500-3000min-1
Stroke length
26mm
Cutting angle range
+45°/-45°
Cutting depth wood
80 mm
Cutting depth steel
6 mm
Degree of protection
IP20
Weight
3.12 kg
Protection class
Double insulated
Construction
Hand-held
Supply connection
Non detachable cord
Rated operation
Continuous operation
Laser output power
≤1mw
Laser class
2
Laser wavelength
650nm
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
92 dB(A)
Acoustic power level LwA
103 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
4.9 m/s²
K = 1.5 m/s²
12 WARRANTY
 This product is warranted for a 5-year period effective from the date of purchase by the
first user.
 This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
 Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
 We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
 Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
 You can always obtain more information at the number 00 32 3 292 92 90.
 Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
 At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
 Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.