Operation Manual

ManualsBrandsPowerplus ManualsSawpow xq 5315

POWXQ5315 EN

1 APPLICATION .................................................................................. 3

2 DESCRIPTION ................................................................................. 3

3 PACKAGE CONTENT LIST ............................................................. 3

4 SYMBOLS ........................................................................................ 3

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4

5.1 Working area ........................................................................................................... 4

5.2 Electrical safety ....................................................................................................... 4

5.3 Personal safety ....................................................................................................... 5

5.4 Power tool use and care ......................................................................................... 5

5.5 Service ..................................................................................................................... 5

6 ADDITIONAL SAFETY INSTRUCTIONS FOR CIRCULAR SAWS 5

7 ADDITIONAL SAFETY INSTRUCTIONS FOR LASERS ................ 6

8 ADJUSTMENTS ............................................................................... 6

8.1 Replacing the saw blade (15) ................................................................................. 6

8.2 Adjusting the depth of cut ..................................................................................... 6

8.3 Setting the mitre angle............................................................................................ 7

8.4 Mounting the edge guide (9) ................................................................................... 7

8.5 Cutting Line Guide .................................................................................................. 7

9 OPERATION ..................................................................................... 7

9.1 Instructions for use ................................................................................................. 7

9.2 Switching on and off ............................................................................................... 7

9.3 Dust extraction (13) ................................................................................................. 7

9.4 Use of the laser (5) .................................................................................................. 7

10 CLEANING AND MAINTENANCE ................................................... 8

10.1 Cleaning................................................................................................................... 8

10.2 Checking and replacing the carbon brushes ........................................................ 8

10.3 Service department ................................................................................................. 8

11 TECHNICAL DATA .......................................................................... 8

12 NOISE ............................................................................................... 8

13 WARRANTY ..................................................................................... 9

Summary of content (10 pages)

PAGE 1
POWXQ5315 EN 1 APPLICATION .................................................................................. 3 2 DESCRIPTION ................................................................................. 3 3 PACKAGE CONTENT LIST ............................................................. 3 4 SYMBOLS ........................................................................................ 3 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 4 5.1 Working area ..................
PAGE 2
14 POWXQ5315 EN ENVIRONMENT ............................................................................... 9 15 DECLARATION OF CONFORMITY .............................................. 10 Copyright © 2016 VARO P a g e |2 www.varo.
PAGE 3
EN POWXQ5315 CIRCULAR SAW 1800W POWXQ5315 1 APPLICATION Your circular saw has been designed for sawing wooden workpieces. The machine is only suitable for right-hand use. The machine is not suitable for stationary use. It is not designed for commercial use. WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions. 2 DESCRIPTION Fig 1 1. Power Cable 2.
PAGE 4
EN POWXQ5315 In accordance with essential safety standards of applicable European directives. Class II - The machine is double insulated; earth wire is therefore not necessary. Wear noise protection. Wear a mask In dusty conditions. Wear eye protection. Wear gloves. Attention Laser radiation! Do not look into the beam. Laser class 2. 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions.
PAGE 5
EN POWXQ5315 5.3 Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.  Use safety equipment. Always wear eye protection.
PAGE 6
POWXQ5315            EN Never block the saw blade guard. Repair a jammed saw blade guard before using the machine again. Replace a broken tension spring before using the machine again. Do not use saw blades made of HSS steel. Do not use bent, deformed or otherwise damaged saw blades. Do not use saw blades which do not meet the specifications stated in this manual. Before sawing, remove all nails and other metal objects from the workpiece.
PAGE 7
EN POWXQ5315  Tighten the lock lever (19). 8.3 Setting the mitre angle The mitre angle is infinitely variable between 0° and 45°.  Loosen the lock lever (7).  Set the required mitre angle using the scale.  Tighten the lock lever (7). 8.4 Mounting the edge guide (9) The edge guide (9) allows sawing parallel to an edge at a maximum distance of 140mm.  Loosen the lock screw (8).  Insert the edge guide (9) into the shoe (12).  Set the edge guide (9) to the required distance.
PAGE 8
EN POWXQ5315 10 CLEANING AND MAINTENANCE Attention! Before performing any work on the equipment, pull the power plug (1). 10.1 Cleaning  Keep the ventilation slots of the machine clean to prevent overheating of the engine.  Regularly clean the machine housing with a soft cloth, preferably after each use.  Keep the ventilation slots free from dust and dirt.  If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc.
PAGE 9
EN POWXQ5315 ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A). aw (Vibration): 1.8 m/s² K = 1.5 m/s² 13 WARRANTY               This product is warranted for a 5-year period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding : batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc.
PAGE 10
EN POWXQ5315 15 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Circular Saw 1800W Trade mark: POWERplus Model: POWXQ5315 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.