Operation Manual

ManualsBrandsPowerplus ManualsToolsPOW1015

POW1015 EN

1 APPLICATION .................................................................................. 2

2 DESCRIPTION ................................................................................. 2

3 PACKAGE CONTENT LIST ............................................................. 2

4 SYMBOLS ........................................................................................ 3

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3

5.1 Working area ........................................................................................................... 3

5.2 Electrical safety ....................................................................................................... 3

5.3 Personal safety ....................................................................................................... 4

5.4 Power tool use and care ......................................................................................... 4

5.5 Service ..................................................................................................................... 4

6 SPECIAL SAFETY INSTRUCTIONS FOR JIG SAWS .................... 5

7 OPERATING INSTRUCTIONS ........................................................ 5

7.1 Starting up ............................................................................................................... 5

7.1.1 Instant response operation ........................................................................................ 5

7.1.2 Continuous operation ................................................................................................ 5

7.1.3 Electronic speed control setting ................................................................................. 5

7.2 Changing the saw blade ......................................................................................... 5

7.3 Dust extraction ........................................................................................................ 6

7.4 Use of pendulum ..................................................................................................... 6

8 TECHNICAL DATA .......................................................................... 6

9 NOISE ............................................................................................... 6

10 WARRANTY ..................................................................................... 6

11 ENVIRONMENT ............................................................................... 7

12 CLEANING AND MAINTENANCE ................................................... 7

13 DECLARATION OF CONFORMITY ................................................ 8

Summary of content (8 pages)

PAGE 1
POW1015 EN 1 APPLICATION .................................................................................. 2 2 DESCRIPTION ................................................................................. 2 3 PACKAGE CONTENT LIST ............................................................. 2 4 SYMBOLS ........................................................................................ 3 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3 5.1 Working area ....................
PAGE 2
EN POW1015 JIG SAW 650W POW1015 1 APPLICATION The power tool is intended for sawing wood, metal and plastics. It is not designed for commercial use. WARNING! Please read and understand this operating manual before use and keep it for your future reference. Your power tool should only be passed on together with these instructions. 2 DESCRIPTION 1. 2. 3. 4. 5. 6. 7. 8. 9.
PAGE 3
EN POW1015 4 SYMBOLS The following symbols are used in this manual and/or on the machine: In accordance with essential requirements of the European directive(s) Class II - The machine is double insulated; Earthing wire is therefore not necessary. Read manual before use Wear a mask In dusty conditions Wear eye protection Wear noise protection 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions.
PAGE 4
EN POW1015   When operating a power tool outdoors, use an extension cable suitable for outdoor use. Using a cord suitable for outdoor use reduces the risk of a lethal electric shock. If operating a power tool in a damp location is unavoidable, use a power supply protected by a residual current device (RCD). Using an RCD reduces the risk of a lethal electric shock. 5.3 Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool.
PAGE 5
EN POW1015 6 SPECIAL SAFETY INSTRUCTIONS FOR JIG SAWS Important! Use of any accessories or attachments other than those supplied or recommended in these operating instructions can mean the risk of injury.             When using jig saws ear protectors and a face mask should be worn. Exposure to noise can cause damage to hearing. Do not use the jig saw to cut asbestos or materials containing asbestos. Do not leave power tools running unattended.
PAGE 6
EN POW1015 7.3 Dust extraction The jigsaw is equipped with a dust extractor socket. You can connect your vacuum cleaner to the socket at the rear of the jigsaw. If you require a special adapter, please contact the manufacturer of your vacuum cleaner. 7.
PAGE 7
POW1015       EN Definitely excluded from the warranty is damage resulting from fluid permeation, excessive dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not following the instructions given in the manual), inexpert assembly, lightning strike, erroneous net voltage. This list is not exhaustive.
PAGE 8
EN POW1015 13 DECLARATION OF CONFORMITY VARO N.V. Product : Trade mark : Model : Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, JIG SAW 650W POWERplus POW1015 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.