Operation Manual

POW1820 EN
Copyright © 2016 VARO P a g e | 1 www.varo.com
1 APPLICATION ................................................................................... 3
2 DESCRIPTION (FIG A) ...................................................................... 3
3 PACKAGE CONTENT LIST .............................................................. 3
4 SYMBOLS .......................................................................................... 3
5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 4
5.1 Working area ............................................................................................................. 4
5.2 Electrical safety ......................................................................................................... 4
5.3 Personal safety ......................................................................................................... 4
5.4 Power tool use and care ........................................................................................... 5
5.5 Service ....................................................................................................................... 5
6 SPECIFIC SAFETY WARNINGS ....................................................... 5
7 OPERATION ...................................................................................... 5
7.1 Mounting an accessory (fig. A & B) ......................................................................... 5
7.2 Using the flexible spindle (fig. C1 - C4 & D) ............................................................ 6
7.3 Replacing the collet (fig. A & B) ............................................................................... 6
7.4 Switching on and off (fig. A) ..................................................................................... 6
7.5 Adjusting the speed (fig. A) ...................................................................................... 6
7.6 Polishing (fig. A & B)................................................................................................. 6
7.7 Cutting and sanding (fig. A & B) .............................................................................. 7
7.8 Deburring (fig. A & B) ................................................................................................ 7
7.9 Drilling (fig. A & B) .................................................................................................... 7
7.10 Routing (fig. A & B) ................................................................................................... 7
7.11 Engraving (fig. A & B) ............................................................................................... 7
7.12 Grinding and sanding (fig. A & B) ............................................................................ 7
7.13 Replacing a sanding band (fig. B) ............................................................................ 7
7.14 Using the grinding stone (fig. B) .............................................................................. 7
7.15 Using the standard (fig. E) ........................................................................................ 7
8 CLEANING AND MAINTENANCE .................................................... 8
8.1 Cleaning ..................................................................................................................... 8
9 TECHNICAL DATA ............................................................................ 8