User Manual

ManualsBrandsPowerplus ManualsPower ToolsPOW2085 ANGLE GRINDER 710W 115MM EN

POW2085 EN

1 APPLICATION ................................................................................... 2

2 DESCRIPTION (FIG. A) ..................................................................... 2

3 PACKAGE CONTENT LIST .............................................................. 2

4 SYMBOLS .......................................................................................... 3

5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 3

5.1 Work area .................................................................................................................. 3

5.2 Electrical safety ......................................................................................................... 3

5.3 Personal safety ......................................................................................................... 4

5.4 Power tool use and care ........................................................................................... 4

5.5 Service ....................................................................................................................... 4

6 SPECIFIC SAFETY WARNINGS ....................................................... 5

7 MOUNTING ACCESSORIES ............................................................. 5

7.1 Assembly (Fig 1) ....................................................................................................... 5

7.2 Mounting a grinding disc (Fig.2 – 3) ........................................................................ 6

7.3 Mounting the side handle (Fig. 4) ............................................................................. 6

8 OPERATION ...................................................................................... 6

8.1 Switching on and off ................................................................................................. 6

9 CLEANING AND MAINTENANCE .................................................... 7

9.1 Cleaning ..................................................................................................................... 7

9.2 Lubrication ................................................................................................................ 7

10 FAULTS.............................................................................................. 7

11 TECHNICAL DATA ............................................................................ 7

12 NOISE ................................................................................................. 7

13 SERVICE DEPARTMENT .................................................................. 7

14 STORAGE .......................................................................................... 7

15 WARRANTY ....................................................................................... 8

16 ENVIRONMENT ................................................................................. 8

17 DECLARATION OF CONFORMITY .................................................. 9

Summary of content (9 pages)

PAGE 1
POW2085 EN 1 APPLICATION ................................................................................... 2 2 DESCRIPTION (FIG. A) ..................................................................... 2 3 PACKAGE CONTENT LIST .............................................................. 2 4 SYMBOLS .......................................................................................... 3 5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 3 5.1 Work area ....................
PAGE 2
EN POW2085 ANGLE GRINDER 710W 115MM POW2085 1 APPLICATION This machine is developed for grinding and roughing of metal and stone. With help of the correct accessories the machine can also be used for brushing and sanding. It is not designed for commercial use. WARNING! Please read and understand this operating manual before use and keep it for your future reference. Your power tool should only be passed on with these instructions. 2 DESCRIPTION (FIG. A) 1. 2. 3. 4. 5. 6.
PAGE 3
EN POW2085 4 SYMBOLS The following symbols are used in this manual and/or on the machine: In accordance with essential requirements of the European directive(s). Class II - The machine is double insulated; Earthing wire is therefore not necessary. Read manual before use. Mandatory use of eye protection. Wear noise protection. 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions.
PAGE 4
EN POW2085  If operating a power tool in a damp location is unavoidable, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. 5.3 Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.  Use safety equipment.
PAGE 5
POW2085 EN 6 SPECIFIC SAFETY WARNINGS                   Check that the maximum speed indicated on the grinding disc corresponds to the maximum speed of the machine. The speed of the machine must not exceed the value on the grinding disc. Make sure that the dimensions of the grinding disc correspond to the specifications of the machine. Make sure that the grinding disc has been mounted and fastened property. Do not use reducing rings or adapters to make the grinding disc fit property.
PAGE 6
EN POW2085 7.2 Mounting a grinding disc (Fig.2 – 3) Use grinding discs of the correct dimension. Use fibre-reinforced grinding discs only. The grinding disc must not touch the edge of the guard.  Press the spindle lock and turn the spindle (2) until it engages in the lock. Keep the spindle lock pressed during this procedure.  Retrieve the outer flange nut (A) from the spindle using the spanner (9).  Position the grinding disc (C)on the backing flange (B).
PAGE 7
EN POW2085 9 CLEANING AND MAINTENANCE Attention! Before performing any work on the equipment, pull the power plug. 9.1     Cleaning Keep the ventilation slots of the machine clean to prevent overheating of the engine. Regularly clean the machine housing with a soft cloth, preferably after each use. Keep the ventilation slots free from dust and dirt. If the dirt does not come off use a soft cloth moistened with soapy water. Never use solvents such as petrol, alcohol, ammonia water, etc.
PAGE 8
POW2085  EN Don’t keep it in plastic bags to avoid humidity build-up. 15 WARRANTY               This product is warranted as provided by law for a 24 -month period effective from the date of purchase by the first user. This warranty covers all material or production flaws excluding: batteries, chargers, defective parts subject to normal wear & tear such as bearings, brushes, cables, and plugs, or accessories such as drills, drill bits, saw blades, etc.
PAGE 9
EN POW2085 17 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Angle grinder 710W 115mm Trade mark: POWERplus Model: POW2085 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.