Operation Manual

ManualsBrandsPowerplus ManualsToolPOW2086

POW2086 EN

1 APPLICATION ................................................................................... 3

2 DESCRIPTION (FIG A) ...................................................................... 3

3 PACKAGE CONTENT LIST .............................................................. 3

4 SYMBOLS .......................................................................................... 4

5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 4

5.1 Working area ............................................................................................................. 4

5.2 Electrical safety ......................................................................................................... 4

5.3 Personal safety ......................................................................................................... 5

5.4 Power tool use and care ........................................................................................... 5

5.5 Service ....................................................................................................................... 5

6 SPECIFIC SAFETY INSTRUCTIONS FOR ANGLE GRINDERS ..... 5

7 OPERATION ...................................................................................... 6

7.1 Switch ........................................................................................................................ 6

7.2 Replacing the grinding wheel ................................................................................... 7

7.3 Test run for new grinding wheels ............................................................................ 7

7.4 Motor .......................................................................................................................... 7

7.5 Grinding wheels ........................................................................................................ 7

8 OPERATING MODES ........................................................................ 7

8.1 Rough grinding: ........................................................................................................ 7

9 FLANGE ARRANGEMENTS WHEN USING GRINDING WHEELS

AND CUTTING WHEELS .................................................................. 8

9.1 Flange arrangements when using a depressed centre or straight grinding wheel

................................................................................................................................... 8

10 CLEANING AND MAINTENANCE .................................................... 8

10.1 Cleaning ..................................................................................................................... 8

10.2 Lubrication ................................................................................................................ 8

11 TECHNICAL DATA ............................................................................ 8

12 NOISE ................................................................................................. 9

13 SERVICE DEPARTMENT .................................................................. 9

14 STORAGE .......................................................................................... 9

Summary of content (11 pages)

PAGE 1
POW2086 EN 1 APPLICATION ................................................................................... 3 2 DESCRIPTION (FIG A) ...................................................................... 3 3 PACKAGE CONTENT LIST .............................................................. 3 4 SYMBOLS .......................................................................................... 4 5 GENERAL POWER TOOL SAFETY WARNINGS ............................ 4 5.1 Working area .................
PAGE 2
15 POW2086 EN WARRANTY ....................................................................................... 9 16 ENVIRONMENT ............................................................................... 10 17 DECLARATION OF CONFORMITY ................................................ 11 Copyright © 2014 VARO p a g e |2 www.varo.
PAGE 3
EN POW2086 ANGLE GRINDER 900W POW2086 1 APPLICATION This machine is developed for grinding and roughing of metal and stone. With help of the correct accessories the machine can also be used for brushing and sanding. It is not designed for commercial use. WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions. 2 DESCRIPTION (FIG A) 1. 2. 3. 4. 5. 6.
PAGE 4
EN POW2086 4 SYMBOLS The following symbols are used in this manual and/or on the machine: In accordance with essential requirements of the European directive(s). Class II - The machine is double insulated; Earthing wire is therefore not necessary. Read manual before use. Mandatory use of eye protection. 5 GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and instructions. Failure to heed warnings and follow instructions may result in electric shock, fire and/or serious injury.
PAGE 5
EN POW2086 5.3 Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool when you are tired or under the influence of drugs, alcohol or medication. A moment of inattention when operating a power tool may result in serious personal injury.  Use safety equipment. Always wear eye protection.
PAGE 6
POW2086                   EN Make sure that the dimensions of the grinding disc correspond to the specifications of the machine. Make sure that the grinding disc has been mounted and fastened properly. Do not use reducing rings or adapters to make the grinding disc fit properly. Treat and store grinding discs in conformance with the supplier’s instructions. Do not use the machine for grinding workpieces with a maximum thickness exceeding the maximum grinding depth of the grinding disc.
PAGE 7
EN POW2086 7.2 Replacing the grinding wheel Before performing any work on the equipment, pull the power plug. Simple wheel change by spindle lock: Press the spindle lock and allow the grinding wheel to latch in place. Open the flange nut with the face spanner. Change the grinding or cutting wheel and tighten the flange nut with the face spanner.
PAGE 8
POW2086 EN 9 FLANGE ARRANGEMENTS WHEN USING GRINDING WHEELS AND CUTTING WHEELS 9.1 Flange arrangements when using a depressed centre or straight grinding wheel 1 Clamping flange 2 Flange nut 10 CLEANING AND MAINTENANCE Attention! Before performing any work on the equipment, pull the power plug. 10.1 Cleaning  Keep the ventilation slots of the machine clean to prevent overheating of the engine.  Regularly clean the machine housing with a soft cloth, preferably after each use.
PAGE 9
EN POW2086 12 NOISE Noise emission values measured according to relevant standard. (K=3) Acoustic pressure level LpA 93 dB(A) Acoustic power level LwA 104 dB(A) ATTENTION! Wear hearing protection when sound pressure is over 85 dB(A). aw (Vibration): Max 25 m/s² K = 1.5 m/s² 13 SERVICE DEPARTMENT   Damaged switches must be replaced by our after-sales service department.
PAGE 10
POW2086    EN We reserve the right to reject a claim whenever the purchase cannot be verified or when it is clear that the product has not been properly maintained. (Clean ventilation slots, carbon brushes serviced regularly, etc.). Your purchase receipt must be kept as proof of date of purchase. Your appliance must be returned undismantled to your dealer in an acceptably clean state, (in its original blow-moulded case if applicable to the unit), accompanied by proof of purchase.
PAGE 11
EN POW2086 17 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, Product: Angle grinder Trade mark: POWERplus Model: POW2086 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.