User Manual

ManualsBrandsPowerplus ManualsPower ToolsPOW30000 IMPACT DRILL 500W EN

POW64251 EN

1 APPLIANCE .................................................................................... 3

2 DESCRIPTION (FIG A) ................................................................... 3

3 PACKAGE CONTENT LIST ............................................................ 4

4 SYMBOLS ....................................................................................... 4

5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 5

5.1 Work area ............................................................................................................... 5

5.2 Electrical safety ..................................................................................................... 5

5.3 Personal safety ...................................................................................................... 5

5.4 Power tool use and care ........................................................................................ 6

5.5 Service .................................................................................................................... 6

6 PARTICULAR SAFETY PRECAUTIONS WHEN WORKING WITH

THE CHAIN SAW ............................................................................ 6

7 KICKBACK SAFETY PRECAUTIONS ........................................... 7

8 ASSEMBLY ..................................................................................... 8

8.1 Fitting the guide bar and chain ............................................................................. 8

8.2 Lubricating oil for the saw chain .......................................................................... 9

9 POWER SUPPLY CONNECTION .................................................. 9

10 OPERATION.................................................................................. 10

10.1 Switching on and off............................................................................................ 10

10.2 Running the saw chain in .................................................................................... 10

10.3 Checking the chain lubrication ........................................................................... 10

10.4 Chain brake .......................................................................................................... 10

10.5 Kickback ............................................................................................................... 11

10.6 Push-back ............................................................................................................ 11

10.7 Pull-forward .......................................................................................................... 11

11 HOW TO WORK WITH THE CHAIN SAW ................................... 11

11.1 Cutting logs, branches, etc. ................................................................................ 12

11.2 Trimming trees ..................................................................................................... 12

11.3 To fell a tree ......................................................................................................... 12

12 CLEANING AND MAINTENANCE ............................................... 13

Summary of content (16 pages)

PAGE 1
POW64251 EN 1 APPLIANCE .................................................................................... 3 2 DESCRIPTION (FIG A) ................................................................... 3 3 PACKAGE CONTENT LIST............................................................ 4 4 SYMBOLS ....................................................................................... 4 5 GENERAL POWER TOOL SAFETY WARNINGS ......................... 5 5.1 Work area ................................
PAGE 2
POW64251 EN 12.1 Re-tensioning the saw chain ............................................................................... 13 12.2 Insufficient chain lubrication .............................................................................. 14 12.3 To carry the chain saw ........................................................................................ 14 12.4 Saw chains ........................................................................................................... 14 12.
PAGE 3
EN POW64251 ELECTRICAL CHAINSAW 2400W POW64251 1 APPLIANCE This model is intended for infrequent use by homeowners, cottagers, and campers, and for such general applications as clearing, pruning, cutting firewood, etc. They are not intended for prolonged use. If the intended use involves prolonged periods of operation, this may cause circulatory problems in the user’s hands due to vibration. It is not designed for commercial use.
PAGE 4
EN POW64251 3 PACKAGE CONTENT LIST     Remove all packing materials Remove remaining packaging and transit supports (if existing) Check the completeness of the packing content Check the appliance, the power cord, the power plug and all accessories for transportation damages. Keep the packaging materials as far as possible till the end of the warranty period. Dispose it into your local waste disposal system afterwards.
PAGE 5
POW64251 5 EN GENERAL POWER TOOL SAFETY WARNINGS Read all safety warnings and all instructions. Failure to follow all warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The term "power tool" in the warnings refers to your mains operated (corded) power tool or battery operated (cordless) power tool. 5.1    5.2 Work area Keep work area clean and well lit. Cluttered and dark areas invite accidents.
PAGE 6
EN POW64251  If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of these devices can reduce dust related hazards. 5.4  Power tool use and care Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. Do not use the power tool if the switch does not turn it on and off.
PAGE 7
POW64251 KICKBACK SAFETY PRECAUTIONS EN KICKBACK may occur when the NOSE or TIP of the guide bar touches an object, or when wood closes in and pinches the saw chain in the cut. Tip contact in some cases may cause a lightning-fast reverse reaction, kicking the guide bar up and back toward the operator. PINCHING the saw chain along the BOTTOM of the guide bar may PULL the saw forward away from the operator.
PAGE 8
POW64251 EN The push (pinch kickback) and pull reactions a = pull B = solid objects C = push 8 8.1 ASSEMBLY Fitting the guide bar and chain If the chain saw is already connected to the power supply: Pull the plug from the socket outlet. Wear protective gloves whenever doing any work on the saw chain. Fig 1 Copyright © 2010 VARO P a g e |8 www.varo.
PAGE 9
POW64251 EN The chain must be fitted over the guide bar so that the cutting edges of the cutters (a) face in the direction that the chain runs. Fig 2 The direction of rotation of the saw chain is indicated by two arrows on the drive-sprocket cover. Hold the guide bar with the nose up-wards and place the saw chain so on the blade. Then put the saw chain round the drive sprocket and place the guide bar with its slot so onto the threaded studs(11).
PAGE 10
POW64251 10 EN OPERATION 10.1 Switching on and off When switching the chain saw on, the hand-protection guard (6) must be in its normal position, i.e. be pressed in the direction of the arrow in Fig 1 against the handle (5). The saw is provided with a safety device to prevent it being switched on accidentally.
PAGE 11
POW64251 10.5 EN Kickback If the upper part of the guide-bar nose should inadvertently be allowed to Touch against some rigid objects, such as the bole of the tree when sawing off branches, or some immediately adjacent object, a trunk lying close to the one that is to be cut through, for instance, the saw with the guide bar may kick back and upwards against the operator in the direction of the arrow in Fig.4.
PAGE 12
POW64251 11.1 EN Cutting logs, branches, etc. When cutting timber with the chain saw, the left arm should be kept almost straight Guide the saw so that no part of your body extends beyond the imaginary line «X» drawn through the guide bar. Press the spiked stop (10) on the saw against the timber and only then start cutting holding the tool by the handle (5) and raising the switch handle.
PAGE 13
POW64251 EN First an undercut notch has to be cut in the trunk of the tree to determine the direction in which the tree is to fall. The undercut, which should have a, depth equal to about a quarter of the diameter of the trunk, should first be sawn downwards at an angle and then horizontally across to meet the top cut (Fig. 11). The felling cut ③should be made slightly above the level of the bottom of the undercut.
PAGE 14
EN POW64251 12.2 Insufficient chain lubrication If after running the chain saw for about 20 minutes only a little lubricating oil has left the container, the cause may be blockage of the oil duct (8) in the saw and/or the oil hole (16) in the guide bar. If so, they should be cleaned. To clean the oil duct (8) the cover plate (7) can be removed, if necessary, after unscrewing its fastening screw. 12.
PAGE 15
POW64251 EN 15 WARRANTY  This product is warranted as provided by law for a 24 months period effective from the date of purchase by the first user. This warranty covers all material or production flaws. It does not include: defective parts subject to normal wear & tear, such as bearings, brushes, cables, plugs or accessories such as drills, drill bits, saw blades etc. ; damage or defects resulting from abuse, accidents or alterations; nor the costs for transport.
PAGE 16
EN POW64251 17 DECLARATION OF CONFORMITY VARO N.V. - Joseph Van Instraat 9 - BE2500 Lier - BELGIUM, declares that, product: Electrical chain saw 2400W trade mark: POWERplus model: POW64251 is in conformity with the essential requirements and other relevant provisions of the applicable European Directives, based on the application of European harmonized standards. Any unauthorized modification of the apparatus voids this declaration.