Operation Manual

ManualsBrandsPowerplus ManualsToolPOW4014

POW4014 EN

1 APPLIANCE ..................................................................................... 2

2 DESCRIPTION ................................................................................. 2

3 PACKAGE CONTENT LIST ............................................................. 2

4 EXPLANATION OF SYMBOLS ....................................................... 3

5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3

5.1 Work area ................................................................................................................ 3

5.2 Electrical safety ....................................................................................................... 3

5.3 Personal safety ....................................................................................................... 4

5.4 Power tool use and care ......................................................................................... 4

5.5 Service ..................................................................................................................... 4

6 ADDITIONAL SAFETY-HINTS FOR SANDERS ............................. 4

7 OPERATION ..................................................................................... 5

7.1 Switching on/off ...................................................................................................... 5

7.2 Attaching the sandpaper ........................................................................................ 5

7.3 Collecting the dust .................................................................................................. 6

8 TECHNICAL DATA .......................................................................... 6

9 NOISE ............................................................................................... 6

10 CLEANING AND MAINTENANCE ................................................... 6

10.1 Cleaning................................................................................................................... 6

11 SERVICE DEPARTMENT ................................................................ 7

12 STORAGE ........................................................................................ 7

13 WARRANTTY ................................................................................... 7

14 ENVIRONMENT ............................................................................... 8

15 DECLARATION OF CONFORMITY ................................................ 8

Summary of content (8 pages)

PAGE 1
POW4014 EN 1 APPLIANCE ..................................................................................... 2 2 DESCRIPTION ................................................................................. 2 3 PACKAGE CONTENT LIST ............................................................. 2 4 EXPLANATION OF SYMBOLS ....................................................... 3 5 GENERAL POWER TOOL SAFETY WARNINGS .......................... 3 5.1 Work area ........................................
PAGE 2
EN POW4014 FINISHING SANDER 135W POW4014 1 APPLIANCE The sander is used to sand and buff wood, plastic and similar materials. It is very important to use the correct sandpaper!!!! It is not designed for commercial use. WARNING! For your own safety, read this manual and the general safety instructions carefully before using the appliance. Your power tool should only be given to other users together with these instructions. 2 DESCRIPTION 1. 2. 3. 4. 5. 6. 7. 8.
PAGE 3
EN POW4014 4 EXPLANATION OF SYMBOLS In this manual and/or on the machine the following symbols are used: Denotes risk of personal injury or damage to the tool. Read manual before use In accordance with essential safety standards of applicable European directives Class II - The machine is double insulated; Earthing wire is therefore not necessary. Wear a mask In dusty conditions Wear noise protection Mandatory use of eye protection.
PAGE 4
EN POW4014 5.3 Personal safety  Stay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury.  Use safety equipment. Always wear eye protection.
PAGE 5
POW4014 EN  Take special care when sanding lead based paint:  All persons entering the work area must wear a mask specially designed for protection against lead paint dust and fumes.  Children and pregnant women must not enter the work area.  Do not eat, drink or smoke in the work area.  Do not leave the tool running. Operate the tool only when hand-held.  Ventilate your work area adequately when you perform sanding operations.  Be sure that there are no cracks or breakage on the pad before use.
PAGE 6
EN POW4014 7.3 Collecting the dust    For a better dust extraction of the working surface, your sanding machine can be connected to the ordinary vacuum cleaner for house-use. Slide the suction mouth of a vacuum cleaner onto the connection. The vacuum-cleaner connecting piece is supplied with the appliance. 8 TECHNICAL DATA Mains voltage / frequency Power rating No load speed Orbits Sanding surface Safety class 230V / 50Hz 135W 11.500 min-1 23.
PAGE 7
EN POW4014 11 SERVICE DEPARTMENT   Damaged switches must be replaced by our after-sales service department. If the connecting cable (or mains plug) is damaged, it must be replaced by a particular connecting cable which is available from our service department. Replacement of the connecting cable must only be carried out by our service department (see last page) or by a qualified person (qualified electrician). 12 STORAGE     Thoroughly clean the whole machine and its accessories.
PAGE 8
EN POW4014 14 ENVIRONMENT Should your appliance need replacement after extended use, do not discard it with the household rubbish but dispose of it in an environmentally safe way. Waste produced by electrical machine items should not be handled like normal household rubbish. Please recycle where recycle facilities exist. Check with your Local Authority or retailer for recycling advice. 15 DECLARATION OF CONFORMITY VARO N.V.