Operation Manual

POW4014 EN
Copyright © 2013 VARO P a g e | 6 www.varo.com
7.3 Collecting the dust
 For a better dust extraction of the
working surface, your sanding machine
can be connected to the ordinary
vacuum cleaner for house-use.
 Slide the suction mouth of a vacuum
cleaner onto the connection.
 The vacuum-cleaner connecting piece is
supplied with the appliance.
8 TECHNICAL DATA
Mains voltage / frequency
230V / 50Hz
Power rating
135W
No load speed
11.500 min
-1
Orbits
23.000 min
-1
Sanding surface
90 X 187 mm
Safety class
II
9 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
80 dB(A)
Acoustic power level LwA
91 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration):
7.1 m/s²
K = 1.5 m/s²
10 CLEANING AND MAINTENANCE
Attention !Before performing any work on the equipment, pull the power
plug.
10.1 Cleaning
 Keep the ventilation slots of the machine clean to prevent overheating of the engine.
 Regularly clean the machine housing with a soft cloth, preferably after each use.
 Keep the ventilation slots free from dust and dirt.
 If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.