User Manual

POW63707

P a g e | 11

www.varo.com

10.2 Replacing the blade

For safety reasons, we recommend having the blade replaced by an authorized professional.

Important: Wear work gloves!

Replacement blade, as this will ensure top

performance and safety under all conditions.

Carry out the following steps to change the

blade:

 Undo the fastening screw (Fig. 7).

 Remove the blade and replace with a new

one.

 When fitting the blade, make sure it is

installed in the right direction. The blade’s

air vanes must jut into the motor

compartment.

 Then retighten the fastening screw. The

tightening torque should be approx. 25 Nm.

10.3 Carbon brushes

In case of excessive sparking, have the carbon brushes checked only by a qualified electrician.

10.4 Maintenance

There are no parts inside the equipment which require additional maintenance.

11 TECHNICAL DATA

POW63707

Power consumption 1100W

Power supply 230V/50Hz

Cutting diameter 330mm

Cutting height 20/40/60mm

No load speed 3700min

Nylon grass collection bag 33l

High stall torque 14Nm

Front wheel 140mm

Rear wheel 140mm

Weight 11kg

Protection class II

Degree of protection IP24

12 SOUND EMISSION

Noise emission values measured according to relevant standard.

POW63707

Sound pressure level LpA 76dB(A) K = 3dB(A)

Sound power level LwA 96dB(A) K = 3dB(A)

ATTENTION ! The sound power pressure may exceed 85 dB(A), in this case

individual hearing protection must be worn.

Vibration aw 2.03m/s² K = 1.5m/s²