User Manual

POW637.. EN

Your mower is equipped with a central height adjustment lever offering 5(=POW63753),

10(=POW63757-63760) height positions

 Stop mower and disconnect spark plug cable before changing mower cutting height.

 The central height adjustment lever offers you 5(=POW63753), 10(=POW63757-63760)

different height positions.

 To change the height of cut, squeeze adjuster lever toward the wheel, moving up or down

to selected height. (Fig.7a,b)

 All wheels will be in the same height of cut.

8 MAINTENANCE

8.1 Spark plug

Use only original replacement spark plug. For best results, replace the spark plug every 100

hours of use. (refer to ENGINE OWNER'S MANUAL)

8.2 Lubrication instructions

Caution: disconnect spark plug before servicing.

1 WHEELS-Lubricate the ball bearings in each wheel at least once a season with a light oil.

2 ENGINE-Follow engine manual for lubrication instructions.

3 BLADE CONTROL-Lubricate the pivot points on the blade control handle and the brake

cable at least once a season with light oil. The blade control must operate freely in both

directions.

9 CLEANING

CAUTION: Do not hose engine. Water can damage engine or contaminate

the fuel system.

 Wipe deck with dry cloth.

 Hose under deck by tilting the mower so that the spark plug is up.

9.1 Engine air cleaner

CAUTION: Do not allow dirt or dust to clog the air filter foam element.

The engine air cleaner element must be serviced (cleaned) after 25 hours normal mowing.

The foam element must be serviced regularly if the mower is used in dry dusty conditions.

(refer to ENGINE OWNER'S MANUAL)